Cable Cleats
The cable clamp for coal mining machine is made of stamped steel plate as the skeleton and high-density polyethylene through injection molding. According to the needs of the coal mining machine working face, it is connected by special bolts to form a protective channel for protecting cables or water pipes. The products mainly include three types: U-type, H-type and O-type. It overcomes the low mechanical strength and lack of effective protection on both sides of traditional cable clamps. When the cable is running in the towing cable trough with the cable clamp, it is easy to be worn and squeezed by the gangue and coal blocks in the trough, the guiding effect is not ideal, and it is easy to hang and break. It can overcome the common causes of cable damage such as "pulling", "folding", "hanging", "smashing" and "squeezing", and can provide all-round protection for cables and water pipes.
Safety Mark Certificate for Mining Products
Safety Certificate
Inspection Report
Inspection Report
Inspection Report
Inspection Report
Get in Touch
Related Products
The cable clamp for coal mining machine is made of stamped steel plate as the skeleton and high-density polyethylene through injection molding.
There are a large number of flammable and explosive components such as gas dust in coal mines, and there are many metal equipment and instruments. When the equipment is moved and used, it is very likely to collide with the cable hook, which will produce sparks and lead to explosions.
The dustproof seal is a single-acting seal that is installed by extruding the outer diameter. It can effectively prevent dust and dirt from entering, and allow the residual oil to flow back.
The Y-ring is designed as a static seal for the cylinder, which can replace the traditional O-ring/retaining ring combination. Through its unique design and material, the allowable extrusion gap can reach 0.4mm at a pressure of 500bar.
Piston rod seal, double-lip design has better sealing effect, and polyacetal back-up ring is better under pressure.
The piston seal is a two-way seal, used in conjunction with two piston guide rings, and has a two-way sealing effect.
